Funny Way to Reload a Mag

Download Article

Download Article

Instructions for reloading/loading a pistol that uses a magazine. Methods to maximize reliability, and applicability to the widest variety of handguns.

Steps

1. 1

   Treat every firearm as if it is always loaded. Keep your finger off the trigger unless you are ready to shoot. Do not point a gun at anything you are not willing to shoot or destroy. Keep the firearm pointed toward the target or a safe backstop at all times.^[1]

2. 2

   If a semi-automatic pistol has been shot empty, the slide will usually lock back after the last shot. You will be able to see the empty chamber through the ejection port. If the slide is not locked back a round may still be in the chamber

   Advertisement

3. 3

   With the thumb of the firing hand, press the magazine release, which is usually a button or small lever on the grip just behind the trigger on the left hand side of the gun. ^[2]

4. 4

   The magazine may drop out of the grip, or may require you to pull it free, depending on the model of the firearm.

5. 5

   Grab a loaded magazine by the narrow front edge. (The side the bullets face.) Place your index finger at the top of the front edge. This will help you guide the magazine.

6. 6

   Insert the magazine into the gun by first placing the back of the magazine against the back of the magazine well. (The hole at the bottom of the grip.) Then push it in firmly upward until you hear a click.^[3]

7. 7

   Pull downward on the magazine to ensure that it is fully seated. Failure to seat the magazine is a primary cause of malfunctions in semi-auto pistols.

8. 8

   Place your non-firing hand over the top of the slide, grasp, pull back sharply until it stops, and release. The slide will snap forward, cambering a round from the loaded magazine. Do not hold on to the slide as it moves forward, or attempt to ease it down. ^[4]

9. 9

   The firearm is now loaded and ready to fire. ^[5]

Advertisement

Add New Question

• Question

  Do you release the slide before inserting a new magazine?

  

  Darth_Doomslayer

  Community Answer

  No, you're handgun is empty, the slide will snap back automatically. You just need to insert a magazine and pull back the slide and you're ready to fire.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

• If the gun has not been shot empty, it is not necessary to work the slide. Simply remove and replace the magazine.

• Some European pistols have a magazine catch at the base of the grip, behind the magazine well. Pull this back toward you to release the magazine. Magazines in these pistols will usually not drop free, and will have to be pulled out.

• For a speed reload, grab the new magazine with the non-shooting hand while pressing the magazine release. Allow the old magazine to fall to the ground while bringing the new magazine into position. This does require a pistol with a thumb release and "drop free" magazines.

Thanks for submitting a tip for review!

Advertisement

• Remember, bullets go through things. Interior walls rarely stop bullets.

• Also, bullets generally bounce off hard things -- so KNOW your backstop is safe, so it won't bounce the bullets back at you. (Proper firing ranges calculate where the bullets will bounce when they are built.)

• Keep the firearm pointed toward the target or a safe backstop at all times.

Advertisement

Things You'll Need

• A pistol that is fed by a detachable magazine and uses a slide mechanism
• A magazine (sometimes referred to a clip which is incorrect and not to be confused with real clips.)
• A legal place to shoot your handgun

About This Article

Thanks to all authors for creating a page that has been read 131,395 times.

Did this article help you?

rozartheive.blogspot.com

Source: https://www.wikihow.com/Reload-a-Pistol

Share this post